HL-2000-CAL Radiometric Calibration Standard

The HL-2000-CAL Calibrated Tungsten Halogen Light Source can calibrate the absolute spectral response of a radiometric system. With this NIST-traceable light source and SpectraSuite, you can determine known absolute intensity values at wavelengths from 300-1050 nm. The HL-2000-CAL Calibrated Tungsten Halogen Light Source can be used to calibrate the absolute spectral response of a radiometric system. With this NIST-traceable light source and SpectraSuite Software, you can determine known absolute intensity values at wavelengths from 300-1050 nm.

Features

• NIST-traceable Calibration from 300-1050 nm. Provides absolute spectral intensity in µW/cm2/nm at the fiber port

• Source can be calibrated specifically for a bare fiber, a fiber plus cosine corrector, or an integrating sphere

• Calibration Certificate. Calibration data is provided in paper and electronic formats, for use with our our OOIIrrad-C Irradiance Software or SpectraSuite

Calibrated for Use with Fiber and Cosine Corrector

The HL-2000-CAL is designed for calibrating a system consisting of a spectrometer and a cosine corrector. The calibration data for the HL-2000-CAL includes absolute intensities for wavelengths between 300-1050 nm.

Calibrated for Use with Integrating Spheres

The HL-2000-CAL-ISP is designed for calibrating the absolute spectral response of your system when using the ISP-50-8-I Integrating Sphere as your sampling optic. It will also work with the ISP-80-8-1; however, there will be more light loss. The HL-2000-CAL-ISP will not work with the ISP-30-6-1 as the port is too small.

Included with the Lamp

The HL-2000-CAL comes with a regulated 12 VDC power supply. Also included is a calibration certificate and a diskette with data files for use with our irradiance software. A cosine corrector is available for an additional charge .

Pricing

Spectral Output

The typical calibration output when using the HL-2000-CAL with a CC-3 Cosine Corrector.

Specifications