The HPX-2000 Xenon Light Source is a high-power source that is especially useful for fluorescence applications, and for other applications where a high-intensity lamp is necessary. The 35-watt, short-arc lamp supplies a continuous spectrum from the UV through the NIR (185-2200 nm). The HPX-2000 features an integrated shutter that can be controlled via switch or TTL signal.
Features
-
High Power Output. High-intensity source is especially useful for fluorescence
-
UV-VIS Range. Covers spectral range of 185-2200 nm
-
Integrated Shutter. Conveniently controlled via switch or TTL signal
The HPX-2000 is available for.
Also available is the PX-2 Pulsed Xenon Light Source, a high flash rate, short-arc lamp with spectral range of 220-750 nm.
The HPX-2000 has an integrated shutter, which can be driven either by a switch or by a TTL signal. The HPX-2000 also comes equipped with a slot for filters up to 25 mm in diameter or 25-mm square, and up to 14-mm thick.
The HPX-2000 bulb is housed in an easy-to-remove bulb module. If your bulb needs to be replaced, you have two options. You can send the module back to us to replace the bulb, or you can order another bulb module.
If you're using optical fibers with the HPX-2000 for UV applications, we recommend our solarization-resistant fibers.
HPX-2000 Spectral Output
HPX-2000 Specifications
| Dimensions: |
145 mm x 165 mm x 260 mm |
| Weight: |
5,000 g |
| Power consumption: |
60 W AC |
| Wavelength range: |
185 nm-2200 nm |
| Power output: |
35 watts |
| Trigger input: |
External TTL positive pulse via 15-pin connector (shutter) |
| Pulse duration: |
Not applicable |
| Bulb lifetime: |
1,000 hours minimum; 2,000 hours typical |
| Connector: |
SMA 905 |
| Timing signals: |
Not applicable |
HPX-2000 Ordering Information
| Item |
Description |
|
| HPX-2000 |
35-watt, continuous-wave xenon light source (185-2200 nm) |
|
| HPX-2000-BM |
Replacement bulb module for HPX-2000 |
| |
